PCB Fabrication Product Center
-
Rogers 3003 selective plating PCB for radar product
This is a 2 layer RF circuit board for Radar detector. The laminate is Rogers 3003. RF PCB typically require laminates with specialized electrical, thermal, mechanical, or other performance characteristics that exceed those of traditional standard FR-4 materials. With our many years of experience with PTFE-based microwave laminate, we understand the high reliability and tight tolerance requirements of most applications.
-
14 layer Panasonic MEGTRON4 PCIE board for Intel
This is a 14 layer circuit board for Intel PCIE board. The PCB with hard gold finish(gold finger). The PCB use Low transmission loss Highly heat resistant Multi-layer circuit board materials MEGTRON4 R-5725 from Panasonic. Dk 3.8 Df 0.007 @10GHz, tg 176°C. The laminate widely used in ICT infrastructure equipment, Supercomputer, Measuring instrument, Antenna, Etc.
-
4 layer rigid flex circuit board for automotive
This is a 6 layer rigid-flex circuit board for automotive electronics. The rigid flex PCB is widely used in medical technology, sensors, mechatronics or in instrumentation, electronics squeezes ever more intelligence into ever smaller spaces, and the packing density increases to record levels again & again.
-
4 layer rigid flex with PI stiffener
This is a 4 layer rigid-flex circuit board for automotive electronics. The rigid flex PCB is widely used in medical technology, sensors, mechatronics or in instrumentation, electronics squeezes ever more intelligence into ever smaller spaces, and the packing density increases to record levels again & again.
-
6 layer rigid flex PCB
This is a 6 layer rigid-flex circuit board for Optics device. The rigid flex PCB is widely used in medical technology, sensors, mechatronics or in instrumentation, electronics squeezes ever more intelligence into ever smaller spaces, and the packing density increases to record levels again & again.
-
12 layer rigid flex PCB Rogers & Dupont Material
This is a 12 layer rigid-flex circuit board for Aerospace product. The rigid flex PCB is widely used in medical technology, sensors, mechatronics or in instrumentation, electronics squeezes ever more intelligence into ever smaller spaces, and the packing density increases to record levels again & again.
-
Isola 370hr Edge palting PCB
This is a 10 layer RF circuit board for telecom industry. RF PCB typically require laminates with specialized electrical, thermal, mechanical, or other performance characteristics that exceed those of traditional standard FR-4 materials. With our many years of experience with PTFE-based microwave laminate, we understand the high reliability and tight tolerance requirements of most applications.
-
RF PCB ceramic substrate + FR4 substrate
This is a 6 layer RF circuit board for telecom industry. RF PCB typically require laminates with specialized electrical, thermal, mechanical, or other performance characteristics that exceed those of traditional standard FR-4 materials. With our many years of experience with PTFE-based microwave laminate, we understand the high reliability and tight tolerance requirements of most applications.
-
Rogers 3003 RF PCB
This is a 2 layer RF circuit board for telecom industry. RF PCB typically require laminates with specialized electrical, thermal, mechanical, or other performance characteristics that exceed those of traditional standard FR-4 materials. With our many years of experience with PTFE-based microwave laminate, we understand the high reliability and tight tolerance requirements of most applications.
-
4 layer circuit board via plugged with solder mask
This is a 4 layer circuit board for automotive product. UL certified Shengyi S1000H tg 150 FR4 material, 1 OZ(35um) copper thickness, ENIG Au Thickness 0.05um; Ni Thickness 3um. Minimum via 0.203 mm plugged with solder mask.
-
6 layer circuit board for industrial sensing & control
This is a 6 layer circuit board for industrial sensing & control product. UL certified Shengyi S1000-2(TG≥170℃) FR-4 material, 1 OZ(35um) copper thickness, ENIG Au Thickness 0.05um; Ni Thickness 3um. V-scoring, CNC Milling(routing). All production comply with RoHS requirement.
-
8 layer circuit board OSP finish for embedded PC
This is a 8 layer circuit board for embedded PC product. The OSP finish(Organic Surface Preservative) is environmentally-friendly compound, and extremely green even in comparison with other Lead-Free PCB finishes, which typically contain more toxic substances, or require substantially higher energy consumption. OSP is a good lead-free surface finish, with very flat surfaces for SMT Assembly, but it also has a relatively short shelf life.