China factory Outlets for Ptfe Pcb Manufacture - RF PCB ceramic substrate + FR4 substrate – Pandawill factory and manufacturers

factory Outlets for Ptfe Pcb Manufacture - RF PCB ceramic substrate + FR4 substrate – Pandawill

Short Description:

Product Detail

Product Tags

Feedback (2)

Our intention is usually to satisfy our buyers by offering golden provider, great rate and good quality for Iteq Laminate Pcb Manufacture, High Quality Pcb Assembly, 4 Layer Pcb Design, "Making the Products and solutions of Superior Quality" may be the eternal target of our company. We make unremitting attempts to comprehend the objective of "We Will Often Preserve in Pace along with the Time".

factory Outlets for Ptfe Pcb Manufacture - RF PCB ceramic substrate + FR4 substrate – Pandawill Detail:

Product Details

Layers	6 layers
Board thickness	1.6MM
Material	IT-180A Tg170 + ceramic （280）
Copper thickness	1 OZ(35um)
Surface Finish	(ENIG) Immersion gold
Min Hole(mm)	0.203 plugged with solder mask
Min Line Width(mm)	0.10mm (4 mil)
Min Line Space(mm)	0.13mm (5 mil)
Solder Mask	Green
Legend Color	White
Impedance	Single Impedance & Differential Impedance
Packing	Anti-static bag
E-test	Flying probe or Fixture
Acceptance standard	IPC-A-600H Class 2
Application	Telecom

RF PCB

In order to meet increasing demands for Microwave & RF Printed Circuit Boards for our customers all around the world, we have increased our investment over the last few years so that we have become a world class manufacturer of PCBs using high frequency laminates.

These applications typically require laminates with specialized electrical, thermal, mechanical, or other performance characteristics that exceed those of traditional standard FR-4 materials. With our many years of experience with PTFE-based microwave laminate, we understand the high reliability and tight tolerance requirements of most applications.

PCB Material For RF PCB

Will all the different features of every RF PCB application, we have developed partnerships with the key material suppliers such as Rogers, Arlon, Nelco, and Taconic just to name a few. While many of the materials are very specialized, we do hold significant stock of product in our warehouse from Rogers (4003 & 4350 series) and Arlon. Not many companies are prepared to do that given the high cost of carrying inventory to be able to respond quickly.

High technology circuit boards fabricated with high frequency laminates can be difficult to design because of the sensitivity of the signals and the challenges with managing the thermal heat transfer in your application. The best high-frequency PCB materials have low thermal conductivity versus the standard FR-4 material used in standard PCBs.

RF and microwave signals are very sensitive to noise and have much tighter impedance tolerances than traditional digital circuit boards. By utilizing ground plans and using a generous bend radius on impedance controlled traces can help make the design perform in the most efficient manner.

Because wavelength of a circuit is frequency dependent and material dependent, PCB materials with higher dielectric constant (Dk) values can result in smaller PCBs as miniaturize circuit designs can be used for specific impedance and frequency ranges. Oftentimes high-Dk laminates (Dk of 6 or higher) are combined with lower cost FR-4 materials to create hybrid multilayer designs.

Understanding the coefficient of thermal expansion (CTE), dielectric constant, thermal coefficient, temperature coefficient of dielectric constant (TCDk), dissipation factor (Df) and even items like relative permittivity, and loss tangent of the PCB materials available will help the RF PCB designer create a robust design that will exceed the required expectations.

Wide Ranging Capabilities

In addition to standard Microwave/RF PCBs our capabilities using PTFE laminates also include:

Hybrid or Mixed Dielectric Boards (PTFE/FR-4 combinations)

Metal Backed and Metal Core PCBs

Cavity Boards (Mechanical and Laser Drilled)

Edge Plating

Constellations

Large Format PCBs

Blind/Buried and Laser Via’s

Soft Gold and ENEPIG Plating

Introduction

Product detail pictures:

Related Product Guide:

We now have our individual sales group, layout team, technical team, QC crew and package group. Now we have strict high-quality control procedures for each procedure. Also, all of our workers are experienced in printing discipline for factory Outlets for Ptfe Pcb Manufacture - RF PCB ceramic substrate + FR4 substrate – Pandawill , The product will supply to all over the world, such as: France, Georgia, Seychelles, Our items are exported worldwide. Our customers are always satisfied with our reliable quality, customer-oriented services and competitive prices. Our mission is "to continue to earn your loyalty by dedicating our efforts to the constant improvement of our merchandise and services in order to ensure the satisfaction of our end-users, customers, employees, suppliers and the worldwide communities in which we cooperate".

Iteq Laminate Pcb Manufacture